1. Home
  2. Downloads
  3. A1452 SCTE-104 Inserter : Build 1.6.1 (S/N >2000)

A1452 SCTE-104 Inserter: Build 1.6.1 (S/N >2000)

Back to Downloads

Release Notes:

  • SCTE-104 Inserter 6.1
    • Supports frame-accurate insertion of SCTE-104 triggers using UTC timestamps
    • Improved logging for LAN-based messages
    • LAN messages longer than 128 bytes now supported
  • Security improvements
    • Now supports setting a security mode via DashBoard, including "Password," "Locked," "Debug," and "Production" 'security modes'
    • SSL Certificates web page added
      • Allows users to upload their own SSL certificates to be used for both inbound access to and outbound access from the encode 
  • Comprehensive aesthetic update to encoder's website
  • Support added for non-US time zones on the Date/Time webpage + time zone info added to all encoder logs
  • ANC Capture web page added
  • System stability improvements 
  • Miscellaneous bug fixes and feature additions
    • Web site retains 14 days of logs, rather than 7
    • Fixes bug that sometimes required rebooting the encoder before being able to upgrade it
    • Web update page now provides upload status and allows larger uploads
    • Users can download all logs with one click
    • User-editable nickname field at top of web main page
    • DHCP address acquisition now works reliably

Please note that this upgrade is only applicable to units with a serial number of 2000 or greater.

Upgrade Instructions

  • Download the update file (a1452v2_1.6.1_r2.tar.bz2) to your computer.
  • Navigate to the Update page the A1452 Web Portal and click the Choose File button.
  • Select the update file you just saved and then click the Upload button to load the file onto the unit.
  • After the update finishes uploading, click the Proceed button to begin the update process. This should take 5-10 minutes
  • When the update is complete, the encoder will reboot automatically; please do not reboot the unit yourself.
  • The web site will indicate that the update is complete once the encoder has rebooted. You may need to perform a "hard refresh" in your browser in order to see the latest version of the A1452 Web Portal.
  • Your system software build will be either "1.6.1" or "x1.6.1", depending on what build you had before the upgrade.

Please note that you will also need to install AVR firmware version 1.14 after installing this upgrade, if it is not already present.